Home / Services / Gelcoat and fiberglass repair
Lake St. Clair · Detroit River
Gelcoat and fiberglass repair at your slip or driveway
Hull gashes, gelcoat chips, and cracked pulpit or stanchion bases. Brad repairs, fairs and compounds the damage at the boat's location instead of a shop queue.
Emergency service, 24/7: call or text 262-300-7729.
What gelcoat and fiberglass repair covers
- Hull gash and gouge repair, laminate rebuilt first where damage is deeper than the surface
- Gelcoat chip and scratch repair, color matched and blended into the surrounding finish
- Pulpit and stanchion base repair where cracking has formed around deck hardware
- Wet sanding and buffing of a repair to bring it to a finished gloss
- Compounding, buffing, polishing and waxing beyond the repaired area
The $150 visit fee is credited to the job. You get the price in writing before any work starts.
Cosmetic chip or structural damage: the first question
Gelcoat is the pigmented outer layer over the fiberglass laminate underneath. A shallow chip or scratch is a cosmetic repair: clean, open the damage to sound material, color match new gelcoat, cure, then wet sand and compound to blend it in. A deeper gash that reaches the glass fabric itself needs the laminate rebuilt first, then gelcoat over the top. Brad checks the depth before quoting either job so you know which one you actually have.
Pulpit and stanchion bases often mean more than a crack
Cracking in the gelcoat around a pulpit, stanchion or other deck hardware base is frequently a sign that water has been working into the deck core underneath the fitting, not just a surface issue. Brad checks for a soft or wet spot in the deck around the hardware before repairing the visible crack, so the fix addresses the cause and not just the symptom.
Gelcoat fades, so an exact color match takes a test panel. New gelcoat is tinted to the weathered color of the surrounding hull, tested on scrap first, and blended rather than treated as a drop-in match. Catalyst ratio and cure time are specific to the product used, so Brad works from that product's own data sheet rather than a generic number.
Compounding and buffing finish the job
A gelcoat repair is wet sanded through a fine grit progression, then compounded and polished to bring the repaired spot back to the same gloss as the rest of the hull. The same compounding and buffing process is also available on its own through boat detailing if the hull just needs a refresh rather than a repair.
Where Brad does gelcoat and fiberglass work
Common questions
Can you fix a gash in my hull without hauling the boat?
Above the waterline, yes, at your slip or driveway. Damage below the waterline or into the structural laminate is better handled with the boat out of the water, so Brad looks at it first and tells you which situation you're in.
Will the gelcoat match the rest of the hull?
Gelcoat fades with age and sun, so a repair is color matched and tested on scrap before it goes on the boat, then blended into the surrounding finish. An exact match years later is never guaranteed, but the goal is a repair that blends in, not a patch that stands out.
My pulpit or stanchion base is cracked, is that just cosmetic?
Not always. Cracking around deck hardware often means water has gotten into the deck core underneath, not just the gelcoat surface, so Brad checks for soft or wet deck core before repairing the visible crack.
Do you do compounding and buffing too?
Yes. Compounding and polishing is part of gelcoat repair work and is also offered on its own through boat detailing.
Checking the hull over at haul-out? See the haul-out inspection checklist for what else to look at while the boat is out of the water.
Gash, chip or cracked hardware base
Text a photo of the damage and Brad will tell you what he thinks it needs.
